OPEN BOX Focus Motor for SCT and EdgeHD
This focus motor is an open box return in good condition, with all original accessories. The product has been discontinued.
The Focus Motor for SCT & EdgeHD provides electronic focusing for Celestron Schmidt-Cassegrain (SCT) and EdgeHD telescope optical tubes. With the focus motor installed, you can bring celestial objects into sharp, precise focus using your telescope’s hand controller or a computer instead of using the focuser knob. A focus motor is great for visual observers who want to dial in exact focus (especially those with dexterity issues) and a must-have accessory for astroimagers. With a motorized focuser installed, an astroimager no longer needs to be physically near the telescope to focus an image. Combined with computerized control of the mount and camera, the focus motor enables the imager to gather data remotely from a backyard observatory, or even a telescope located hundreds of miles away. As an added bonus, port covers protect the ports while not in use, and the covers cannot be lost due to the tethered design.
Compatible Optical Tubes
|Aperture||Celestron Telescope Design||Models||Compatible with #94155 Focus Motor?||Notes|
|6"||Schmidt-Cassegrain||All||Yes||Not compatible with #93648 OAG, or #93519 diagonal|
|8"||Schmidt-Cassegrain||Built before 2006||No|
|8"||Schmidt-Cassegrain||Built 2006 or later||Yes|
|8"||Rowe-Ackermann Schmidt Astrograph||All||Yes|
|9.25"||Schmidt-Cassegrain||Built before 2006||No|
|9.25"||Schmidt-Cassegrain||Built 2006 or later||Yes|
|9.25"||EdgeHD||All||No||Currently not compatible due to mechanical interferences|
|11"||Schmidt-Cassegrain||Built before 2006||No|
|11"||Schmidt-Cassegrain||Built 2006 or later||Yes|
|11"||Rowe-Ackermann Schmidt Astrograph||All||Yes||Requires #94255 Focuser Retrofit Kit|
|14"||Schmidt-Cassegrain||Built before 2006||No|
|14"||Schmidt-Cassegrain||Built 2006 or later||Yes|
|36cm||Rowe-Ackermann Schmidt Astrograph||All||Yes|
There are three options for powering your Celestron Focus Motor:
- When using a Celestron computerized mount, you can power and control the focus motor through the mount using the supplied AUX cable. This allows control from the mount’s hand controller (NexStar+ or StarSense) or a computer.
- If you are not using a Celestron mount, you can power and control the focus motor from a computer USB port. You will need a user supplied USB A-to-B cable.
- You may also opt to use an external 12V DC power source which plugs into the motor’s power jack.
Celestron offers a free Focuser Utility program for computer control. The Celestron PWI software can also control the focus motor. To use third-party focuser control software, an ASCOM driver is needed.
|Motor:||DC servo motor|
|Spur gears||Brass, 1:1 gear ratio, 38mm diameter, 45 teeth|
|Focuser shaft coupler||Aluminum clamping sleeve|
|Microprocessor||NXP Kinetis series, Arm Coretex-M4 core|
|AUX port power||Powered by Celestron computerized mount AUX port, connecting cable supplied|
|USB port power||USB3 or USB2 providing at least 900mA|
|DC jack power||12V DC, 1A, 5.5mm/2.1mm tip positive plug|
|Compatibility||All SCTs produced after 2006 except 5" SCT, all Edge HD, RASA 8", RASA 36cm, 7" Mak-Cass|
|Speed rates||8°/sec , 32°/sec , 128°/sec|
|California Residents||View Proposition 65 Warning|