Shipping on this item will be quoted and billed separately. We will reach out to you to estimate a lead time and make shipping arrangements.

Enjoy exceptional optical and tracking performance for astrophotography, or research, with the CDK600 package! Includes a CDK24 optical tube and L-600 mount.

• CDK24 optical tube:
  • f/6.5 and 3974mm focal length
  • No coma, no off-axis astigmatism, and no field curvature.
  • Pinpoint stars across a 70mm image circle.
  • Rock solid fused silica mirrors with low thermal expansion.
  • Carbon fiber optical tube assembly for rigidity and fast cooling.
  • Simple secondary mirror collimation thanks to the fixed primary mirror.
• L-600 direct drive mount:
  • Zero periodic error, zero backlash, and minimal maintenance due to the lack of gears.
  • Slew speeds up to 50 degrees/sec for satellite tracking and fast target acquisition.
  • Sidereal tracking accuracy of < 0.30 arcseconds RMS over 5 minutes.
  • High resolution optical encoders on both axes for precision feedback.
  • Can be installed in either equatorial, or alt/az configuration.
  • Includes PWI4 software (ASCOM compliant) for mount control.

Description

The CDK24 (0.61 m) f/6.5 Corrected Dall-Kirkham Astrograph telescope has a dual truss design, with 3 cooling fans for the back of the primary mirror and 4 fans for the front surface of the primary mirror. The CDK24 covers a 70 mm field of view without any field curvature, off-axis coma, or astigmatism. The instrument weight is 240 lbs (109 kg) and comes standard with a back plate retaining ring ready to accept the focuser of your choice.

All CDK24 telescopes come with fused silica primary and secondary mirrors. 

 The L-Series mount combines versatility, simplicity and affordability by combining all the technology of our Observatory class telescopes into a compact stand-alone mount.   In its Alt/Az configuration it is considerably more compact than its German equatorial counterpart, allowing a larger telescope to fit in a smaller enclosure.  Unlike German Equatorial mounts, there are no meridian flips to deal with, and no  large protruding counterweights to create a dangerous hazard in a public observatory. Alt/Az is more intuitive to use and no polar alignment is needed. Besides, it is the way the pros do it!

L-Series Mount Features:

• Direct-drive motors on each axis for smooth, fast, and virtually silent movement of the telescope
• Slew speeds up to 50 degrees per second
• High resolution encoders on each axis for precise positioning
• Zero backlash
• Zero periodic error
• PointXP mount modeling software
• Enclosed electronics
• Through the mount cabling

Direct drive motors and encoders	Direct Drive motors and on-axis encoders eliminate the need for  gears, thereby eliminating backlash and periodic error. With high-resolution encoders providing the feedback for the direct drive motors, not only will the telescope track without periodic error and backlash, the mount will also counter wind gusts with precise servo feedback.
Incredible Slew Speed	The direct drive motors can move the telescope at speeds up to 50 degrees per second for tracking satellites or just to minimize target acquisition time.
Dual mounting bracket	PlaneWave style mounting bracket to hold CDK17/20 onto inside of fork arm with additional option of mounting a scope on the outside of the fork arm. Optional dovetail clamp required.
Azimuth dovetail balance system	For precise center of gravity balance whether in Alt-Az or Equatorial configuration
Through the mount cabling	Access panels in the fork arm and azimuth axis allow for camera equipment cabling through the inside of the mount.
Proven CDK700/PW1000 Technology	The L-Series uses the same proven technology as the CDK700 and 1-Meter PW1000 which are being used in Universities round the world.

 

Item Number	Description	Price
240130Q	CDK-600 (CDK24Q / L-600)	$80,000
600180	IRF90 Rotating Focuser	$4,500
240901	EFA, Focuser Accessory Control	$1,000
Total		$85,500

Specifications

Mount System

Type	Alt-Azimuth / Equatorial Direct Drive Mount
Weight	338 lbs (153 kg)
Max. Load Capacity	300 lbs (136 kg)
Latitude Range	0 to 90 degrees, Northern and Southern hemispheres
Cable Management	Equipment cables can be wired through mount

Control System

Control Electronics	PlaneWave Interface dual axis telescope control
User Interface	PlaneWave Interface 4 (PWI4) Control Software with integrated PointXP mount modeling software
Homing Sensors	Home position sensors are included allowing the mount can find its home position on power up.
Slew Rate	20 degrees per second (standard); 50 degrees per second (maximum), both axes
Power Requirement	Accepts 120 VAC. Supplied with 12VDC 15A Regulated Power Adapter

Optical System

Aperture	24 inch (610 mm)
Focal Length	3962 mm (156.46 inch)
Focal ratio	F/6.5
Central Obstruction	47% of the Primary Mirror Diameter
Back Focus from Mounting Surface	14.349 inch (358 mm)
Weight	240 lbs (108.9 kg)
Optimal Field of View	70 mm (58 arcminute)

Motion Control

Motor Control	Industrial grade brushless motor control system and built in electronics
Motor – Azimuth and Altitude	Direct Drive 3 Phase Axial-Flux Torque Motors
Encoder – Azimuth and Altitude	152mm stainless steel encoder ring with reader built into the azimuth and altitude axes. 18,880,000 counts per revolution (0.069 arcsecond resolution).
Motor Torque	Approximately 20 ft-lbs continuous; 50 ft-lbs peak
Drive Electronics	Industrial grade, off-the-shelf brushless motor drives for each axis with custom-designed integrated interface board.
Telescope Control Software	PlaneWave Interface (PWI4). Incorporates PointXP mount modeling software by Dave Rowe. Provides HTTP and ASCOM control interfaces.

System Performance

Pointing Accuracy	<10 arcsecond RMS with PointXP Model
Pointing Precision	2 arcseconds at sidereal velocity
Tracking Accuracy	< 0.3 arcseconds over a 5 minute period at sidereal velocity
System Natural Frequency	10 Hz or greater

Included Items

Heating elements for dew prevention	The heating pads on the primary and secondary mirror require the 600195 Delta-T controller sold separately
OTA Cover	To protect the primary mirror and inside of the optical tube
Flashdrive	Contains software and instructions for collimation and spacing the primary to secondary mirror
Hardware	Six 1/2-13 x 1 1/4″ socket head cap screws to bolt the mount to the pier, or wedge   Six 1/2-13 washers One extended length shoulder bolt for RA axis to EQ wedge alignment
One 16′ USB cable	To connect the mount to the observatory control computer
One 120VAC power cable	To provide power to the mount
Standard Allen Key set	For tightening bolts used on the mount
Flashdrive	Contains PWI4 software for mount control and instructions for installation
Gamepad	Used for control of the mount tracking speeds for visual observing