QHY163M is a model designed for astrophotography beginners. It exhibits excellent sensitivity and low noise with its 4/3-inch sensor having about twice the field of view. It is well suited to planetary and deep-space imaging particularly when mated with the CFW3 filter wheel. This model has two-stage thermal electric cooling of the sensor to about minus 40 degrees C below ambient for maximum reduction of dark current noise in long exposures.
QHY163 is a model designed for astrophotography beginners. It exhibits excellent sensitivity and low noise with its 4/3-inch sensor having about twice the field of view. It is well suited to planetary and deep-space imaging particularly when mated with the CFW3 filter wheel. This model has two-stage thermal electric cooling of the sensor to about minus 40 degrees C below ambient for maximum reduction of dark current noise in long exposures.
QHY163 incorporates QHY’s Anti-Amp Glow technology to significantly reduce typical CMOS amplifier glow to a minimum, allowing excellent calibration by subtracting a dark frame.
QHY163 utilizes the Anti-Dew features common to the QHY COLDMOS cameras. Dew is moisture that condenses from the air onto the outside of the chamber window. Frost is water vapor that freezes when it comes into contact with the inside of the chamber window or the surface of the sensor. QHY has nearly 20 years of experience designing cooled cameras and these models benefit from those years of anti-dew and anti-frost design experience. To help prevent dew from forming on the chamber window heating elements are built into the light shield just above the chamber. To avoid frost from forming inside the chamber a desiccant tube is provided that can easily be attached by the user to the outside of the camera when needed to dry the internal atmosphere of the chamber and remove any built-up moisture.
QHY163 models can be used as guiding devices, too. The Opto-isolated guiding port is a standard ST-4 configuration using an RJ11 style Jack. A guiding cable is included with each camera.
The QHY163M uses a relatively large 4/3-inch, 16 Megapixel CMOS sensor, available in both monochrome and color. The QHY163M has exceptionally low readout noise (as low as 1 electron!), low dark current and two-stage cooling capable of reducing the sensor temperature to -40C below ambient. The sensor chamber is sealed and the optical window is heated to prevent dew. The camera’s interface is USB 3.0 and delivers 23FPS@16 megapixel full resolution output, 30FPS@4K HD video output.
|CMOS Sensor||Panasonic 16mega pixel 4/3inch sensor|
(163C discontinued in 2020)
|Effective Pixels||16 mega|
|Fullwell||18ke- to 20ke-|
|AD Sample Depth||12bit/10bit (output as 16bit and 8bit)|
|Max Full Frame Rate and ROI Frame Rate||22.5FPS@16mega Full Resolution
30FPS@4K HD Video
|Readout Noise||2.4e@low gain
|Dark Current||0.006e/pixel/sec @ -20C|
|Exposure Time Range||60us-1800sec|
|Shutter Type||Electric Rolling Shutter|
|Built-in Image Buffer||128MByte DDR2 memory|
|Cooling System||Dual Stage TEC cooler (about -40C below ambient）（Test temperature +20°）|
|Optic Window Type||QHY163M: AR+AR High Quality Multi-Layer Anti-Reflection Coating|
|Anti-Dew Heater||Silicon gel tube socket|
|Back Focal Length||17.5mm|
Buy risk-free: When it’s time to trade up you’ll get the most value for your used gear.