QHY461PH
QHY461PH
QHY461PH

QHY

QHY461PH

Regular price
$ 10,800.00
Sale price
$ 10,800.00
Unit price
per 

This item is a Special Order from the Manufacturer

Special Order

Model QHY461PH
Image Sensor SONY IMX461 BSI CMOS Sensor
Pixel Size 3.76um x 3.76um
Color / Mono Version Mono Only
Image Resolution 11760 × 8896
Effective Pixels 102 Megapixels
Effective Image Area 44mm x 33mm

 

Description

Native 16 bit A/D: The new Sony sensor has native 16-bit A/D on-chip. The output is real 16-bits with 65536 levels. Compared to 12-bit and 14-bit A/D, a 16-bit A/D yields higher sample resolution and the system gain will be less than 1e-/ADU with no sample error noise and very low read noise.

BSI: One benefit of the back-illuminated CMOS structure is improved full well capacity. This is particularly helpful for sensors with small pixels. In a typical front-illuminated sensor, photons from the target entering the photosensitive layer of the sensor must first pass through the metal wiring that is embedded just above the photosensitive layer. The wiring structure reflects some of the photons and reduces the efficiency of the sensor. In the back- illuminated sensor the light is allowed to enter the photosensitive surface from the reverse side. In this case the sensor’s embedded wiring structure is below the photosensitive layer. As a result, more incoming photons strike the photosensitive layer and more electrons are generated and captured in the pixel well. This ratio of photon to electron production is called quantum efficiency. The higher the quantum efficiency the more efficient the sensor is at converting photons to electrons and hence the more sensitive the sensor is to capturing an image of something dim.

Zero Amplify Glow: This is also a zero amplifer glow camera.

TRUE RAW Data: In the DSLR implementation there is a RAW image output, but typically it is not completely RAW.  Some evidence of noise reduction and hot pixel removal is still visible on close inspection.  This can have a negative effect on the image for astronomy such as the “star eater” effect.  However,  QHY Cameras offer TRUE RAW IMAGE OUTPUT and produces an image comprised of the original signal only, thereby maintaining the maximum flexibility for post-acquisition astronomical image processing programs and other scientific imaging applications.

Anti-Dew Technology: Based on almost 20-year cooled camera design experience, The QHY cooled camera has implemented the fully dew control solutions. The optic window has built-in dew heater and the chamber is protected from internal humidity condensation. An electric heating board for the chamber window can prevent the formation of dew and the sensor itself is kept dry with our silicon gel tube socket design for control of humidity within the sensor chamber.

Cooling: In addition to dual stage TE cooling, QHYCCD implements proprietary technology in hardware to control the dark current noise.

Multiple Readout Modes

Multiple Readout Modes are special for QHY 16-bit Cameras (QHY600/268/461/411).  Different readout modes have different driver timing, etc., and result in different performance. See details at “Multiple Readout Modes and Curves” Part.

Random change thermal noise suppression function

You may find some types of thermal noise can change with time in some back-illuminated CMOS cameras. This thermal noises has the characteristic of the fixed position of typical thermal noise, but the value is not related to the exposure time.  Instead, each frame appears to have its own characteristics.  The QHY600/268/461/411 use an innovative suppression technology that can significantly reduce the apparent level of such noise.

UVLO Protection

UVLO(Under Voltage Locking) is to protect the electronic device from damage caused by abnormally low voltages.

Our daily life experience tells us that the actual operational voltage of an electrical device must not significantly exceed the rated voltage, otherwise it will be damaged. For such precision equipment as cameras, long-term work at too low input voltage can also be detrimental to the working life of the camera, and may even make some devices, such as power manager, burn up due to long-term overload. In the all-in-one driver and SDK after 2021.10.23 stable version, the camera will give a warning when the input voltage of the camera is below 11V.

Optimizing USB Traffic to Minimize Horizontal Banding

It is common behavior for a CMOS sensor to contain some horizontal banding. Normally, random horizontal banding can be removed with multiple frame stacking so it does not affect the final image. However, periodic horizontal banding is not removed with stacking so it may appear in the final image. By adjust the USB traffic in Single Frame mode or Live Frame mode, you can adjust the frequency of the CMOS sensor driver and it can optimize the horizontal banding appeared on the image. This optimized is very effective to remove the periodic banding in some conditions.

A typical Periodic Horizontal Noise under certain USB_TRAFFIC values.

After Adjusting the USB Traffic to avoid the periodic horizontal noise.

Reboot the camera by power off and on

The camera is designed to use the +12V to reboot the camera without disconnecting and reconnecting the USB interface. This means that you can reboot the camera simply by shutting down the +12V and then powering it back on. This feature is very handy for remote controlling the camera in an observatory. You can use a remotely controlled power supply to reboot the camera. There is no need to consider how to reconnect the USB in the case of remote control.

Specifications

Model

QHY461PH
Image Sensor SONY IMX461 BSI CMOS Sensor
Pixel Size 3.76um x 3.76um
Color / Mono Version Mono Only
Image Resolution 11760 × 8896
Effective Pixels 102 Megapixels
Effective Image Area 44mm x 33mm
Sensor Surface Glass AR+AR Multi-Coating Clear Glass
Full Well Capacity (1×1, 2×2, 3×3) 50ke- / 200ke- / 450ke- in Standard Mode
80ke- / 320ke- / 720ke- in Extend Full Well Mode
A/D 16-bit (0-65535 greyscale) for 1X1Binning18bit in 2X2 19BIT in 3X3 20BIT in 4*4 software Binning
Sensor Size TYPICAL 3.4inch
Read Noise 1e to 3.7e (in HGC mode)
Dark Current Approx 0.003e/pixel/sec @ -20C
Exposure Time Range 50us – 3600sec
Frame Rate 2.7FPS @ 8BIT 1.3FPS@16BIT on USB3.0
2.7FPS @ 16BIT 6FPS @ 14BIT on 10Gigabit Fiber
Shutter Type Electric Rolling Shutter
Computer Interface USB3.0
Filter Wheel Interface 4PIN QHYCCD CFW Port
Built-in Image Buffer 1GByte DDR3 Buffer
Cooling System Dual Stage TEC cooler(-35C below ambient with air cooling).
Anti-Dew Heater Yes
Telescope Interface
Optic Window Type AR+AR High Quality Multi-Layer Anti-Reflection Coating
Back Focal Length

32.5mm


Curves

Mechanical Dimensions

Personal Upgrade Path

Buy risk-free: When it’s time to trade up you’ll get the most value for your used gear.