Description

NextGEN 3" Mounting Plate Finder

These mounting plates fit on the back dovetail of the NextGEN 3" and are secured in place by three set screws located in the mounting plate 120 degrees apart. It is important that the back-focus distance be set as closely as possible for the NextGEN reducers which is why each mounting plate has a unique length for every model camera. Backfocus distance should be known to +/- 0.04 inch (1mm) for best performance. Use the table below to find the appropriate mounting plate for your camera.

Specifications

If your camera is not listed below and you know the back-focus (BF) distance and thread type for your camera, you can find the stock number as follows:

1. Take the base stock number for your camera's thread: 
   T-thread #17482 
   STL #17483 
   Pentax-thread #17485 
   SCT-thread #17486 
   Canon EF #17487 
   SXVF #17488 
   Tube #17489
2. Add a dash
3. Add the tube length, which is equal to 3.276 - BF, with BF measured in inches.

Note: For 3" NextGEN Telecompressors, the minimum tube length available is 1.41 inches for the STL, ALTA, and 3x24tpi mounts, 66 inches for Tube mounts, and 88 inches for C-Thread, T-Thread, Pentax, SCT, Canon EF, and 72x1mm.